how to fix leaky faucet

how to fix leaky faucet

Single lever faucets stand out for their reliability and ease of use. These advantages provided them with a well-deserved popularity. Unfortunately, no matter how reliable and quality would not be the instrument with time he will need to be repaired.

The basis of a single hand-mixer circuit is a cartridge. This node is responsible for managing the pressure of the water supply temperature of the liquid, turn on and off. Most of the faults in a single lever faucet designs are connected with the cartridge.

leaky bathtub faucet

The procedure is not complicated. The following instructions will help to cope with it, even a person not versed in plumbing.

So, how to replace the cartridge into the mixer with his own hands?

The first thing to shut off the water supply to the unit serviced. Once you've made sure that the faucet is turned off by the water system, you can start to replace the failed node.

Step One. Remove the decorative plastic insert on the lever faucet, it will allow access to the screw fastening the handle itself.



Step Two. Unscrew the screw in the nutria arm, then with no great effort to pull it up and remove the cartridge rod.

Step Three. Unscrew the trim, it hides the nut fastening the cartridge.

Step Four. The key unscrew the nut and extract the faulty node.

Step Five. Set the mixer and produce a new cartridge assembly it in reverse order.


In nine cases out of ten the cause of failure is mechanical damage to the cartridge. Grains of sand, metal particles and other debris which is abundantly available in a liquid referred to as "tap water" falling into the mixer, to derive the cartridge down. Installation of the water supply mechanical cleaning filter removes this problem.

Good luck to you repairs!

bathroom repair